Exam newsSecurity+ V8 (SY0-801) is now liveRead the update →
MockDenLog inStart free

Security+ Performance-Based Questions: How to Approach PBQs

What Security+ PBQs are, the common types, a skip and return tactic, a time budget and three original worked examples you can practise with.

Calm tactics for the hands-on questions

Performance-based questions are the part of Security+ that candidates worry about most, often more than they need to. A PBQ looks different from the rest of the exam: instead of four options, you get a small simulated task such as a firewall table, a set of logs or a list of items to drag into place. The knowledge tested is the same as elsewhere on the exam. What changes is the way you show it. This guide covers what PBQs are, the forms they tend to take, how to manage them against the clock, and three original worked examples.

FactDetail
Current examSY0-801 (Security+ V8), launched 17 November 2026
Question typesMultiple choice and performance-based, maximum of 90 questions
Time90 minutes for the whole exam
Passing score750 on a scale of 100 to 900
PBQ formatsSimulations and virtual environments (CompTIA)
Partial creditMay exist on some PBQs; CompTIA does not say which

What CompTIA means by a PBQ

CompTIA describes performance-based questions as items that test your ability to solve problems in realistic settings. They come in two forms:

  • Simulations. A restricted mock interface, such as a firewall rule editor or a drag and drop screen. Several routes to the right answer may be accepted, and there is a reset button that clears your work on that item only.
  • Virtual environments. A fuller system where you can take many paths, including wrong ones.

CompTIA states that simulations can be skipped and revisited, while virtual environment items must be completed when you meet them. It also says a correct outcome earns credit regardless of the path you took to get there.

Note

CompTIA does not publish how many PBQs appear on Security+, and the count can vary between exam forms. Prepare for the format, not for a number.

Common PBQ types on Security+

Based on the published objectives, these are the kinds of tasks a Security+ PBQ is likely to ask for. None of the examples below are real exam items.

TypeWhat you doObjectives it draws on
Firewall or ACL configurationOrder or edit rules to allow and block trafficPorts, protocols, segmentation
Log analysisRead entries and identify the attack or the compromised hostIndicators of attack, monitoring
Matching controlsDrag controls or tools to the scenario they fitControl types, security operations
Ordering a processPut incident response or recovery steps in sequenceIncident response, resilience
Certificate or crypto choicesPick the right algorithm, certificate type or protocolCryptography and PKI
Secure network placementPlace devices such as a WAF, IDS or jump server in a diagramSecurity architecture

The skip and return tactic

Many candidates report that PBQs appear near the start of the exam. That is where the most time is usually lost, because a nervous candidate spends twelve minutes on the first simulation and then races through everything else.

A simple routine works well:

  1. Read the task once. Note what is being asked and whether it is a simulation (with a reset button) or a virtual environment.
  2. If it is a simulation and it looks long, flag it and move on. You can come back once the quicker marks are banked.
  3. If it is a virtual environment, do your best now. You will not get another chance.
  4. Answer all multiple choice questions before returning to flagged PBQs.
  5. Never leave a PBQ empty. A partial attempt may earn something; a blank cannot.
Exam trap

Pressing reset clears everything you did on that item. Only use it when your work has become genuinely confused, not because one step feels uncertain.

A time budget that works

With 90 minutes for up to 90 questions, here is one way to split the time. Treat it as a starting point and adjust it during your mock exams.

PhaseTimeAim
First pass of PBQs (only the short ones)Up to 10 minutesGrab easy PBQ marks, flag the rest
Multiple choiceAbout 50 minutesSteady pace, flag any doubts
Return to flagged PBQsAbout 20 minutesWork carefully, one at a time
Final reviewAbout 10 minutesRevisit flagged multiple choice

Worked example 1: firewall rule ordering

Scenario. A web server sits at 10.0.5.20 in a DMZ. The firewall processes rules from top to bottom and stops at the first match. The requirements are: allow HTTPS from anywhere to the web server; allow SSH to the web server only from the admin subnet 10.0.1.0/24; block everything else to the web server. You are given these four rules in a jumbled order and must arrange them.

RuleSourceDestinationPortAction
AAny10.0.5.20AnyDeny
B10.0.1.0/2410.0.5.2022Allow
CAny10.0.5.20443Allow
DAny10.0.5.2022Deny

Working. Because the first match wins, specific allow rules must sit above broader deny rules. Rule B, the admin SSH allow, must come before rule D, otherwise D would block administrators. Rule C must come before rule A, or HTTPS would never get through. Rule A is the catch all and belongs at the bottom.

Answer. B, C, D, A works, and so does any order that keeps B above D, C above A and A at the bottom. That illustrates CompTIA's point that more than one correct arrangement can exist. Rule D is technically redundant given rule A, but it does no harm.

Worked example 2: log analysis

Scenario. You are shown these authentication log extracts from a VPN gateway and asked which statement is most accurate.

TimeUserSource IPCountryResult
08:02j.okafor81.2.69.10United KingdomSuccess
08:19j.okafor203.0.113.44SingaporeSuccess
08:21j.okafor203.0.113.44SingaporeMFA push approved
08:24j.okafor203.0.113.44SingaporeDownload of 2.1 GB from file share

Working. A login from the United Kingdom followed by one from Singapore seventeen minutes later is physically impossible, the classic impossible travel indicator. The approved MFA push suggests the user accepted a prompt they did not start, often through MFA fatigue. The large download suggests exfiltration.

Answer. The account is likely compromised: the attacker probably has the password and obtained MFA approval, and data may have been taken. Sensible next steps are to disable the account or revoke its sessions, block the source address and begin incident response.

On the exam

Log PBQs reward reading every column. Times, locations and volumes often matter more than the result field. Train yourself to ask "what is unusual here?" before looking at the options.

Worked example 3: matching controls to scenarios

Scenario. Drag each control to the situation it addresses best. Each control is used once.

SituationControl
Staff keep visiting a fake login page that copies the company portalSecurity awareness training
A contractor needs temporary access to one server, with every session recordedPrivileged access management
Laptops are often left in taxisFull disk encryption
An attacker who steals a password should still be unable to sign inMultifactor authentication
Unknown executables must be prevented from running on point of sale terminalsApplication allow list

Working. Look for the key phrase in each situation. "Fake login page" points to phishing, a human problem best addressed by awareness. "Temporary access with recording" fits privileged access management. "Lost laptops" means data at rest, so encryption. "Stolen password" is the textbook case for MFA. "Prevented from running" on fixed purpose devices suggests an allow list.

Answer. As shown in the table. In a real matching task some distractors may be left over, so expect options that fit nothing.

How to practise PBQs

You do not need the real interface to get good at PBQs. You need the underlying skills and familiarity with the format.

  • Rebuild the tasks yourself. Write your own small firewall tables and swap rule orders until first match logic is automatic.
  • Read real logs. Free tools and home lab virtual machines can produce authentication, web server and firewall logs to study.
  • Use timed practice. MockDen's full mock exams include matching and ordering items designed to mimic the feel of PBQs, with explanations for each part.
  • Rehearse the skip decision. In each mock, decide within 30 seconds whether to tackle or flag a long item.
Tip

After every mock, note how long each PBQ style item took you. If one type always runs over, that is your next practice topic.

Final thoughts

PBQs test the same objectives as the rest of Security+, only in a hands-on format. Learn the underlying skills, recognise the item type, budget your time and never leave one blank. For the full exam format and domain weights, see the Security+ exam page.

If you want to try the format before exam day, start with the free Security+ practice on MockDen, including matching and ordering questions with worked explanations. MockDen is an independent study site and is not affiliated with or endorsed by CompTIA.

Last checked against official sources on 19 November 2026.

Frequently asked questions

How many PBQs are on Security+?

CompTIA does not publish a fixed number. The exam has a maximum of 90 questions mixing multiple choice and performance-based items, and candidates commonly report seeing a handful of PBQs.

Can I skip a PBQ and come back to it?

CompTIA says simulation PBQs can be skipped and revisited, but PBQs delivered in a full virtual environment must be completed when they appear. Check the item type before you move on.

Do PBQs give partial credit?

CompTIA has said partial credit may exist on some performance-based questions, but it does not say which. Complete as much of each PBQ as you can rather than leaving it blank.

How should I practise for Security+ PBQs?

Practise the underlying tasks, such as reading logs, ordering firewall rules and matching controls to scenarios, and use timed mock exams that include matching and ordering items so the format feels routine.

Sources

MockDen is independent and not affiliated with the exam owners. Always confirm fees and dates on the official page before booking.

Put it into practice

Find out where you stand in 20 minutes

Take the free diagnostic for Security+, then let MockDen build a study plan around your weak spots.

Keep reading